HFTAC-9kW-S18

HFTAC-9kW-S18 is a Level 2 home EV charger from HFT with up to 40 A (9.6 kW) output and a J1772 connector — 24 ft cable, non-networked operation.

Our take

A certified standby draw of exactly zero watts — a figure only a couple of the 56 models in the 40 A class manage, against a 2.38 W median that compounds to about 21 kWh a year on a typical unit. This one is offline, so there is no radio to keep awake, and the idle math simply disappears. Charging is class-standard: 9.6 kW on a 50 A circuit adds roughly 34 miles of range per hour, and 25 of our 29 tracked EVs accept the full rate. The 24 ft cable sits on the cohort median.

Charging
Connector type J1772
Max output current 40 A
Max output power 9.6 kW
Input voltage 240 V
Smart features
Wi-Fi / app connected No
Installation
Cable length 24 ft
Certification
ENERGY STAR certified Yes
Efficiency
Standby power draw 0 W

How fast does the HFTAC-9kW-S18 charge?

Real charging speed is the lower of the charger's 9.6 kW output and each vehicle's onboard AC limit. Full-charge times and range added per hour on the HFTAC-9kW-S18:

Vehicle Real rate 0–100% Range/hr
Tesla Model Y 9.6 kW 7.8 h 42 mi
Tesla Model 3 9.6 kW 7.8 h 46 mi
Ford Mustang Mach-E 9.6 kW 9.5 h 34 mi
Chevrolet Equinox EV 9.6 kW 8.9 h 36 mi
Hyundai Ioniq 5 9.6 kW 8.8 h 36 mi
Ford F-150 Lightning 9.6 kW 13.6 h 23 mi

EV compatibility

The HFTAC-9kW-S18's J1772 connector plugs directly into 23 of the 29 EVs tracked in this database. The other 6 (Hyundai Ioniq 5, Tesla Cybertruck, Tesla Model 3, Tesla Model S, Tesla Model X, Tesla Model Y) work with it too — requires a J1772-to-NACS adapter (Tesla includes one with its vehicles).

Unsure which port your car has? See J1772 vs NACS for home charging.

Similar chargers

Frequently asked questions

Is the HFTAC-9kW-S18 ENERGY STAR certified?

Yes, the HFTAC-9kW-S18 is ENERGY STAR certified for standby energy efficiency.

Does the HFTAC-9kW-S18 have Wi-Fi or app control?

No, the HFTAC-9kW-S18 is a non-networked charger without app connectivity.

What size breaker does the HFTAC-9kW-S18 need?

At its maximum 40 A output the HFTAC-9kW-S18 needs at least a 50 A circuit, per the NEC rule that continuous loads may use only 80% of breaker capacity.

Sources